What's Included: The Trane S9V2C080U5VSBB furnace offered by Kyle Heat and Air delivers superior efficiency and superior convenience with a 90% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its variable-speed blower motor and two-stage heating system provide better temperature control. Includes licensed and insured HVAC deployment by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 90% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Variable-Speed ECM Blower Motor: Improves airflow control, reduces noise, and enhances indoor air high-grade. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Sealed Combustion System: Enhances safety and efficiency by reducing heat loss. Quiet Operation: Designed for smooth, low-noise operation. The Trane S9V2C080U5VSBB furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S9V2C080U5VSBB Capacity (BTU) 80K Stages Variable Speed Cabinet Size   AFUE 90% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8V2C080M5PCAA furnace offered by Kyle Heat and Air delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its variable-speed blower motor and two-stage heating system provide better temperature control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Variable-Speed ECM Blower Motor: Improves airflow control, reduces noise, and enhances indoor air quality. Durable & Compact Design: Built for long-lasting efficiency with flexible installation options. Multi-Speed Blower: Improves airflow control for better ease and system compatibility. Quiet Operation: Designed for smooth, low-noise operation. The Trane S8V2C080M5PCAA furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round well-being and performance.   Furnace Model S8V2C080M5PCAA Capacity (BTU) 80K Stages Variable Speed Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1C080M5PSCA furnace offered by Kyle Heat and Air delivers reliable heat with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Single-Stage Heating: Provides reliable, consistent heating for steady warmth. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Quiet Operation: Designed for smooth, low-noise operation. The Trane S8X1C080M5PSCA furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8X1C080M5PSCA Capacity (BTU) 80K Stages Single-Stage Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The Trane S8X1A040M3PSCA furnace offered by Kyle Heat and Air delivers reliable heating with a 80% AFUE rating, ideal for homeowners seeking comfort and energy savings. Its durable design ensures consistent warmth. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Ensures optimal energy use and lower heating costs. Single-Stage Heating: Provides reliable, consistent heating for steady warmth. Durable & Compact Design: Built for long-lasting performance with flexible installation options. Multi-Speed Blower: Improves airflow control for better comfort and system compatibility. Quiet Execution: Designed for smooth, low-noise operation. The Trane S8X1A040M3PSCA furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Trane cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model S8X1A040M3PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size   AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less

What's Included: The RunTru A96DF2080C furnace offered by Kyle Heat and Air delivers advanced heating with fuel efficiency and comfort. With a 96% AFUE rating and reliable design, it provides precise temperature control and lowers energy costs. Part of the trusted Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts fuel into heat efficiently, reducing energy use and lowering utility bills. Two-Stage Running: Provides consistent warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A96DF2080C furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible RunTru cooling system for a complete HVAC setup designed for year-round comfort and performance. Furnace Model A96DF2080C Capacity (BTU) 80K Stages Two-Stage Cabinet Size C AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The RunTru A96DF2060B furnace offered by Kyle Heat and Air delivers advanced heating with power efficiency and comfort. With a 96% AFUE rating and reliable design, it provides precise temperature control and lowers energy costs. Part of the trusted Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts fuel into heat efficiently, reducing energy use and lowering utility bills. Two-Stage Operation: Provides consistent warmth while optimizing energy use. Durable Construction: Made with superior materials for reliable performance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A96DF2060B furnace from Kyle Heat and Air is a stable, efficient heating solution. Pair it with a compatible RunTru cooling system for a complete HVAC setup designed for year-round comfort and functionality. Furnace Model A96DF2060B Capacity (BTU) 60K Stages Two-Stage Cabinet Size B AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The RunTru A5MXB0040C3HCA furnace offered by Kyle Heat and Air delivers advanced heating with resources efficiency and comfort. With a AFUE rating and reliable design, it provides precise temperature control and lowers energy costs. Part of the dependable Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: AFUE Efficiency: Converts fuel into heat efficiently, reducing energy use and lowering utility bills. Single-Stage Operation: Provides consistent warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A5MXB0040C3HCA furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible RunTru cooling system for a complete HVAC setup designed for year-round comfort and performance. Furnace Model A5MXB0040C3HCA Capacity (BTU) 40K   Stages Single-Stage Cabinet Size A AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The RunTru A96DF2100C furnace offered by Kyle Heat and Air delivers advanced heating with energy efficiency and ease. With a 96% AFUE rating and reliable design, it provides precise temperature control and lowers energy costs. Part of the trusted Trane family. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Converts fuel into heat efficiently, reducing fuel use and lowering utility bills. Two-Stage Operation: Provides consistent warmth while optimizing energy use. Durable Construction: Made with quality materials for reliable performance. Compact Design: Fits various installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. The RunTru A96DF2100C furnace from Kyle Heat and Air is a dependable, efficient heating solution. Pair it with a compatible RunTru cooling system for a complete HVAC setup designed for year-round comfort and effectiveness. Furnace Model A96DF2100C Capacity (BTU) 100K Stages Two-Stage Cabinet Size C AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Lennox ML180UH110V60CK furnace from Kyle Heat and Air delivers consistent heating and energy efficiency at an affordable price, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective satisfaction. Single-Stage Operation: Provides steady, consistent heating for consistent comfort. Durable Steel Cabinet: Ensures long-lasting performance with a wear-resistant design that reduces maintenance. Flexible Installation Options: Compact and versatile to fit various spaces and layouts. Quiet Operation: Designed to minimize noise for a comfortable home environment. The Lennox ML180UH110V60CK furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH110V60CK Capacity (BTU) 88K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Lennox ML180UH110V60C furnace from Kyle Heat and Air delivers reliable heating and energy efficiency at an affordable price, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will review on-site and provide a written change-order quote before any extra work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with electricity-conscious operation for cost-effective comfort. Single-Stage Operation: Provides steady, reliable heating for consistent comfort. Durable Steel Cabinet: Ensures long-lasting performance with a wear-resistant design that reduces maintenance. Flexible Installation Options: Compact and versatile to fit various spaces and layouts. Quiet Operation: Designed to minimize noise for a comfortable home environment. The Lennox ML180UH110V60C furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH110V60C Capacity (BTU) 180K Stages Single-Stage Cabinet Size c AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Goodman GR9S960403AN furnace offered by Kyle Heat and Air delivers reliable heating and high power efficiency at an affordable price, ideal for residential use. With a 96% AFUE rating and durable design, it provides consistent comfort while controlling heating costs. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Provides consistent, energy-efficient thermal to reduce operating costs. Single-Stage Heating: Offers reliable warmth with simple operation year-round. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile mounting. Quiet Operation: Minimizes noise for a comfortable indoor environment. The Goodman GR9S960403AN furnace from Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a compatible Goodman cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model GR9S960403AN Capacity (BTU)   Stages Single-Stage Cabinet Size   AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM)

Read more less

What's Included: The Trane S8X2 furnace offered by Kyle Heat and Air provides reliable, optimized heating for residential use. With an 80% AFUE rating, it balances power savings and consistent warmth. Its two-stage heating and multi-speed blower upgrade comfort and temperature control for a stable indoor climate. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Delivers cost-effective heating with energy savings. Two-Stage Heating Adjusts heat output for better comfort, efficiency, and quieter operation. Multi-Speed Blower Improves airflow and system compatibility for balanced indoor air. Durable Construction Built with quality materials for long-lasting performance and low maintenance. Flexible Setup Fits various home layouts and HVAC setups. The Trane S8X2 furnace offered by Kyle Heat and Air is a reliable choice for homeowners seeking efficiency and comfort. Paired with a Trane cooling system, it offers a complete HVAC solution for year-round climate control.   Furnace Model S8X2C100M5PSCB Capacity (BTU) 100K Stages Two-Stage Cabinet Size C AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local

Read more less