Mini Split Systems

86 products

  • Daikin AURORA - 24K BTU Multi-Zone Wall Mount Indoor Unit with Install

    Daikin Daikin AURORA - 24K BTU Multi-Zone Wall Mount Indoor Unit with Install

     

    Kyle Heat and Air brings you the Daikin Aurora 24,000 BTU (2 Ton) Multi-Zone Wall Mount Indoor Unit (FTXV24AVJU9) is designed to pair with compatible MXM-A multi-split outdoor condensers for flexible multi-room climate control. Featuring Aurora-series technology, this indoor unit delivers efficient, quiet comfort as part of a whole-home or multi-zone system. Key Features & Benefits 24,000 BTU (2 Ton) Capacity - Efficient heating and cooling for individual zones within a multi-zone system. Multi-Zone Compatible - Pairs with Daikin MXM-A outdoor units for flexible whole-home comfort. Inverter Technology - Precise temperature control within a shared multi-zone system. R32 Refrigerant - Eco-friendly refrigerant for reduced environmental impact. Quiet Operation - Low noise levels for comfortable indoor environments. Wall-Mounted Indoor Unit - Sleek, space-saving design for any room. Ideal Applications Multi-zone systems paired with Daikin MXM-A outdoor units. Individual room control within a whole-home multi-zone system. Bedrooms, offices, and living spaces requiring independent zone temperature control. Adding zone coverage to an existing multi-zone system. What's Included This product includes professional installation by Kyle Heat and Air along with the following install kit items: Condenser Pad (Small) — 18x38x3 Proselect equip pad, sized for mini-split condenser 14/4 Communication Wire — 14/4 stranded THHN 600V, 50' roll, indoor-to-outdoor signal cable Condensate Pump — Ghost 100-250V mini condensate pump (orange), required when gravity drain isn't viable Whip (A/C Whip) — 1/2 x 6 #10 THHN whip NM, flex conduit from disconnect to outdoor unit Electrical Disconnect — 60A non-fusible pullout disconnect switch at outdoor unit Warranty 12-year limited warranty on parts for registered systems System Performance Capacity (BTU) 24,000 Tonnage 2 Ton Refrigerant R32 Voltage 208/230V Mount Type Wall Mount Indoor Unit (IDU) Model FTXV24AVJU9 Operating Range Heating: -4°F to 64.4°F | Cooling: 50°F to 114.8°F Liquid Line 1/4" Gas Line 5/8" Notes Aurora-series cold climate technology. Built-in WiFi optional.

     

    $5,315.82

  • GE Appliances Caliber 115V - 12K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

    GE Appliances GE Appliances Caliber 115V - 12K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G12CB1BEA Outdoor Unit: The GE Appliances Caliber Series outdoor unit delivers 20 SEER2 cooling. Features A-PAM DC Inverter technology for precise capacity modulation and quiet operation, Blue Fin anti-corrosion coating for long-lasting durability, and on-demand defrost. R-410A refrigerant. 10-year parts and compressor warranty when registered with licensed install. GS12WB1BEA Indoor Unit: The GE Appliances Caliber 115V 12K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 12K BTU Tonnage 1-Ton Cooling Efficiency (SEER2) 20 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G12CB1BEA Indoor Unit Model GS12WB1BEA Mount Type Wall Mount Refrigerant R-410A Voltage 115V Liquid Line 1/4" Suction Line 3/8" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit SPEC SHEET SPEC SHEET INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $5,376.84

  • GE Appliances Caliber 230V - 9K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

    GE Appliances GE Appliances Caliber 230V - 9K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

     

    GE Appliances provides high-efficiency ductless mini-split systems that pair inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G09CB2BEA Outdoor Unit: The GE Appliances Caliber Series outdoor unit delivers 20 SEER2 cooling. Features A-PAM DC Inverter technology for precise capacity modulation and quiet operation, Blue Fin anti-corrosion coating for long-lasting durability, and on-demand defrost. R-410A refrigerant. 10-year parts and compressor warranty when registered with licensed install. GS09WB2BEA Indoor Unit: The GE Appliances Caliber 230V 9K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 9K BTU Tonnage 0.75-Ton Cooling Efficiency (SEER2) 20 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G09CB2BEA Indoor Unit Model GS09WB2BEA Mount Type Wall Mount Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 3/8" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit SPEC SHEET SPEC SHEET INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $5,361.27

  • GE Appliances Caliber 230V - 12K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

    GE Appliances GE Appliances Caliber 230V - 12K BTU Single-Zone Wall Mount Heat Pump - 20 SEER2 with Install

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G12CB2BEA Outdoor Unit: The GE Appliances Caliber Series outdoor unit delivers 20 SEER2 cooling. Features A-PAM DC Inverter technology for precise capacity modulation and quiet operation, Blue Fin anti-corrosion coating for long-lasting durability, and on-demand defrost. R-410A refrigerant. 10-year parts and compressor warranty when registered with licensed install. GS12WB2BEA Indoor Unit: The GE Appliances Caliber 230V 12K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 12K BTU Tonnage 1-Ton Cooling Efficiency (SEER2) 20 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G12CB2BEA Indoor Unit Model GS12WB2BEA Mount Type Wall Mount Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 3/8" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit SPEC SHEET SPEC SHEET INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $5,436.01

  • GE Appliances Caliber 230V - 18K BTU Single-Zone Wall Mount Heat Pump - 19 SEER2 with Install

    GE Appliances GE Appliances Caliber 230V - 18K BTU Single-Zone Wall Mount Heat Pump - 19 SEER2 with Install

     

    GE Appliances provides high-efficiency ductless mini-split systems that pair inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G18CB2BEA Outdoor Unit: The GE Appliances Caliber Series outdoor unit delivers 19 SEER2 cooling. Features A-PAM DC Inverter technology for precise capacity modulation and quiet operation, Blue Fin anti-corrosion coating for long-lasting durability, and on-demand defrost. R-410A refrigerant. 10-year parts and compressor warranty when registered with licensed install. GS18WB2BEA Indoor Unit: The GE Appliances Caliber 230V 18K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 18K BTU Tonnage 1.5-Ton Cooling Efficiency (SEER2) 19 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G18CB2BEA Indoor Unit Model GS18WB2BEA Mount Type Wall Mount Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 1/2" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit SPEC SHEET SPEC SHEET INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $6,177.06

  • GE Appliances Caliber 230V - 24K BTU Single-Zone Wall Mount Heat Pump - 18 SEER2 with Install

    GE Appliances GE Appliances Caliber 230V - 24K BTU Single-Zone Wall Mount Heat Pump - 18 SEER2 with Install

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G24CB2BEA Outdoor Unit: The GE Appliances Caliber Series outdoor unit delivers 18 SEER2 cooling. Features A-PAM DC Inverter technology for precise capacity modulation and quiet operation, Blue Fin anti-corrosion coating for long-lasting durability, and on-demand defrost. R-410A refrigerant. 10-year parts and compressor warranty when registered with licensed install. GS24WB2BEA Indoor Unit: The GE Appliances Caliber 230V 24K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 24K BTU Tonnage 2-Ton Cooling Efficiency (SEER2) 18 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G24CB2BEA Indoor Unit Model GS24WB2BEA Mount Type Wall Mount Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 1/2" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit SPEC SHEET SPEC SHEET INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $6,821.60

  • GE Appliances Altitude 230V - 12K BTU Single-Zone Ceiling Cassette Heat Pump - 21 SEER2 with Install

    GE Appliances GE Appliances Altitude 230V - 12K BTU Single-Zone Ceiling Cassette Heat Pump - 21 SEER2 with Install

     

    GE Appliances provides high-efficiency ductless mini-split systems that pair inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G12AD2BEA Outdoor Unit: The GE Appliances Altitude 230V outdoor unit delivers 21 SEER2 cooling. Inverter-driven compressor for variable-capacity comfort, Blue Fin anti-corrosion coating, and whisper-quiet operation. R-410A refrigerant. 10-year parts and compressor warranty when registered. US12CB2BEA + GACCP01GA Indoor Unit: The GE Appliances Altitude 230V 12K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 12K BTU Tonnage 1-Ton Cooling Efficiency (SEER2) 21 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G12AD2BEA Indoor Unit Model US12CB2BEA + GACCP01GA Mount Type Ceiling Cassette Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 3/8" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $6,877.03

  • GE Appliances Altitude 230V - 18K BTU Single-Zone Ceiling Cassette Heat Pump - 19 SEER2 with Install

    GE Appliances GE Appliances Altitude 230V - 18K BTU Single-Zone Ceiling Cassette Heat Pump - 19 SEER2 with Install

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G18AD2BEA Outdoor Unit: The GE Appliances Altitude 230V outdoor unit delivers 19 SEER2 cooling. Inverter-driven compressor for variable-capacity comfort, Blue Fin anti-corrosion coating, and whisper-quiet operation. R-410A refrigerant. 10-year parts and compressor warranty when registered. US18CB2BEA + GACCP01GA Indoor Unit: The GE Appliances Altitude 230V 18K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 18K BTU Tonnage 1.5-Ton Cooling Efficiency (SEER2) 19 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G18AD2BEA Indoor Unit Model US18CB2BEA + GACCP01GA Mount Type Ceiling Cassette Refrigerant R-410A Voltage 208/230V Liquid Line 1/4" Suction Line 1/2" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $7,537.12

  • GE Appliances Altitude 230V - 24K BTU Single-Zone Ceiling Cassette Heat Pump - 18 SEER2 with Install

    GE Appliances GE Appliances Altitude 230V - 24K BTU Single-Zone Ceiling Cassette Heat Pump - 18 SEER2 with Install

     

    GE Appliances provides high-efficiency ductless mini-split systems that pair inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G24AD2BEA Outdoor Unit: The GE Appliances Altitude 230V outdoor unit delivers 18 SEER2 cooling. Inverter-driven compressor for variable-capacity comfort, Blue Fin anti-corrosion coating, and whisper-quiet operation. R-410A refrigerant. 10-year parts and compressor warranty when registered. US24LB2BEA + GALCP01GA Indoor Unit: The GE Appliances Altitude 230V 24K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 24K BTU Tonnage 2-Ton Cooling Efficiency (SEER2) 18 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G24AD2BEA Indoor Unit Model US24LB2BEA + GALCP01GA Mount Type Ceiling Cassette Refrigerant R-410A Voltage 208/230V Liquid Line 3/8" Suction Line 5/8" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $8,472.49

  • GE Appliances Altitude 230V - 36K BTU Single-Zone Ceiling Cassette Heat Pump - 18 SEER2 with Install

    GE Appliances GE Appliances Altitude 230V - 36K BTU Single-Zone Ceiling Cassette Heat Pump - 18 SEER2 with Install

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.What's Included: 1G3036AD2BEA Outdoor Unit: The GE Appliances Altitude 230V outdoor unit delivers 18 SEER2 cooling. Inverter-driven compressor for variable-capacity comfort, Blue Fin anti-corrosion coating, and whisper-quiet operation. R-410A refrigerant. 10-year parts and compressor warranty when registered. US36LB2BEA + GALCP01GA Indoor Unit: The GE Appliances Altitude 230V 36K BTU indoor unit delivers whisper-quiet, draft-free conditioned air. Insta-Position auto-swing louvers (up for cooling, down for heating), Quiet Mode, Turbo Mode, and Warm Start (no cold drafts on heat startup). Built-in air filter included. Includes licensed and insured installation by professionals, along with the Ductless Install Kit for a complete setup.Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Ductless Mini-Split Installation Kit Refrigerant line set copper line set (liquid + suction), insulated Electrical dedicated circuit breaker or disconnect, whip connections Mounting hardware wall bracket or cassette plate, weather seal Condensate drainage drain hose and fittings from indoor unit Communication wire signal/control cable between ODU and IDU Not Included The following items are not included unless listed on your written invoice: Electrical panel upgrades or new circuit breakers beyond the dedicated circuit Structural wall reinforcement or special mounting substrates Refrigerant line set extension beyond standard run lengths Condensate pump when gravity drain is not feasible Crane or rooftop rigging for difficult equipment access Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed, our technician will assess on-site and provide a written change-order quote. Nothing extra is charged without your written approval.5-Year Labor WarrantyLabor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Capacity (BTU) 36K BTU Tonnage 3-Ton Cooling Efficiency (SEER2) 18 Heat Capacity @ 5°F N/A Outdoor Unit Model 1G3036AD2BEA Indoor Unit Model US36LB2BEA + GALCP01GA Mount Type Ceiling Cassette Refrigerant R-410A Voltage 208/230V Liquid Line 3/8" Suction Line 3/4" AHRI N/A Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit Indoor Unit INSTALLATION MANUAL INSTALLATION MANUAL Outdoor Unit Indoor Unit LIMITED WARRANTY LIMITED WARRANTY

     

    $9,484.45

  • GE Appliances ALTITUDE MULTI SERIES 2-PORT 18K Outdoor Unit - Multi-Zone

    GE Appliances GE Appliances ALTITUDE MULTI SERIES 2-PORT 18K Outdoor Unit - Multi-Zone

     

    GE Appliances provides high-efficiency ductless mini-split systems that pair inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.Component listing: Outdoor unit only. This 2G18AD2BEA is the 18K BTU Altitude Multi multi-zone outdoor unit, compatible with multiple GE Appliances indoor units for a complete multi-zone ductless system. Sold without indoor units purchase matching IDUs separately. R-410A refrigerant, 208/230V. Capacity (BTU) 18K BTU Tonnage 1.5-Ton Outdoor Unit Model 2G18AD2BEA Type Multi-Zone Outdoor Unit Refrigerant R-410A Voltage 208/230V Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit INSTALLATION MANUAL Outdoor Unit LIMITED WARRANTY

     

    $6,326.52

  • GE Appliances ALTITUDE MULTI SERIES 3-PORT 24K Outdoor Unit - Multi-Zone

    GE Appliances GE Appliances ALTITUDE MULTI SERIES 3-PORT 24K Outdoor Unit - Multi-Zone

     

    GE Appliances offers high-efficiency ductless mini-split systems that combine inverter technology, built-in WiFi, and whisper-quiet operation for precise room-by-room comfort. From single-zone wall mounts to multi-zone cassette systems, GE Appliances ductless solutions provide flexible, energy-efficient heating and cooling without ductwork.Component listing: Outdoor unit only. This 3G24AD2BEA is the 24K BTU Altitude Multi multi-zone outdoor unit, compatible with multiple GE Appliances indoor units for a complete multi-zone ductless system. Sold without indoor units purchase matching IDUs separately. R-410A refrigerant, 208/230V. Capacity (BTU) 24K BTU Tonnage 2-Ton Outdoor Unit Model 3G24AD2BEA Type Multi-Zone Outdoor Unit Refrigerant R-410A Voltage 208/230V Warranty 10 Year Parts (When Registered with OEM) RESOURCES Outdoor Unit INSTALLATION MANUAL Outdoor Unit LIMITED WARRANTY

     

    $7,391.41

© 2026 Kyle Heat and Air LLC, Powered by Shopify

      Login

      Forgot your password?

      Don't have an account yet?
      Create account