American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H6036A Condenser: Positioned as the step-up 'Silver 15' single-stage heat pump above the 5A6H4, offering a wider efficiency range up to 15.2-16 SEER2 and 7.5-8.1 HSPF2 on R-454B refrigerant across 1.5-5 ton capacities. NOTE: could not verify the exact model prefix '5A6H6' in any official American Standard documentation; the verified official Silver 15 heat pump prefix is 5A6H5 -- please confirm the model numbering with your supplier before publishing. American Standard 5TEM4B03AC3 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1517BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.8 HSPF2 Condenser Model 5A6H6036A Condenser Stages Single Air Handler Model 5TEM4B03AC3 Heat Kit Model BAYHTR1517BR Heat Source Heat Pump w/ Electric Backup AHRI 218107879 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H6030A Condenser: Positioned as the step-up 'Silver 15' single-stage heat pump above the 5A6H4, offering a wider efficiency range up to 15.2-16 SEER2 and 7.5-8.1 HSPF2 on R-454B refrigerant across 1.5-5 ton capacities. NOTE: could not verify the exact model prefix '5A6H6' in any official American Standard documentation; the verified official Silver 15 heat pump prefix is 5A6H5 -- please confirm the model numbering with your supplier before publishing. American Standard 5TEM4B03AC3 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1510BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Heating Efficiency (HSPF2) 7.8 HSPF2 Condenser Model 5A6H6030A Condenser Stages Single Air Handler Model 5TEM4B03AC3 Heat Kit Model BAYHTR1510BR Heat Source Heat Pump w/ Electric Backup AHRI 218107101 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H6024A Condenser: Positioned as the step-up 'Silver 15' single-stage heat pump above the 5A6H4, offering a wider efficiency range up to 15.2-16 SEER2 and 7.5-8.1 HSPF2 on R-454B refrigerant across 1.5-5 ton capacities. NOTE: could not verify the exact model prefix '5A6H6' in any official American Standard documentation; the verified official Silver 15 heat pump prefix is 5A6H5 -- please confirm the model numbering with your supplier before publishing. American Standard 5TEM4B02AC2 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1510BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Heating Efficiency (HSPF2) 7.8 HSPF2 Condenser Model 5A6H6024A Condenser Stages Single Air Handler Model 5TEM4B02AC2 Heat Kit Model BAYHTR1510BR Heat Source Heat Pump w/ Electric Backup AHRI 218106487 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H6018A Condenser: Positioned as the step-up 'Silver 15' single-stage heat pump above the 5A6H4, offering a wider efficiency range up to 15.2-16 SEER2 and 7.5-8.1 HSPF2 on R-454B refrigerant across 1.5-5 ton capacities. NOTE: could not verify the exact model prefix '5A6H6' in any official American Standard documentation; the verified official Silver 15 heat pump prefix is 5A6H5 -- please confirm the model numbering with your supplier before publishing. American Standard 5TEM4B02AC2 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1505BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Heating Efficiency (HSPF2) 7.8 HSPF2 Condenser Model 5A6H6018A Condenser Stages Single Air Handler Model 5TEM4B02AC2 Heat Kit Model BAYHTR1505BR Heat Source Heat Pump w/ Electric Backup AHRI 218105929 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4060A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4D06AC4 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1523BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4060A Condenser Stages Single Air Handler Model 5TEM4D06AC4 Heat Kit Model BAYHTR1523BR Heat Source Heat Pump w/ Electric Backup AHRI 215610900 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4048A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4D06AC4 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1523BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4048A Condenser Stages Single Air Handler Model 5TEM4D06AC4 Heat Kit Model BAYHTR1523BR Heat Source Heat Pump w/ Electric Backup AHRI 215610892 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4042A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM6D04AV3 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1517BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4042A Condenser Stages Single Air Handler Model 5TEM6D04AV3 Heat Kit Model BAYHTR1517BR Heat Source Heat Pump w/ Electric Backup AHRI 215610886 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4036A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4B03AC3 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1517BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4036A Condenser Stages Single Air Handler Model 5TEM4B03AC3 Heat Kit Model BAYHTR1517BR Heat Source Heat Pump w/ Electric Backup AHRI 215610864 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4030A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4B03AC3 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1510BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4030A Condenser Stages Single Air Handler Model 5TEM4B03AC3 Heat Kit Model BAYHTR1510BR Heat Source Heat Pump w/ Electric Backup AHRI 215610854 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4024A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4B02AC2 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1510BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4024A Condenser Stages Single Air Handler Model 5TEM4B02AC2 Heat Kit Model BAYHTR1510BR Heat Source Heat Pump w/ Electric Backup AHRI 215610846 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

American Standard, offered by Kyle Heat and Air, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, American Standard products meet top standards in residential heating and cooling. Whether upgrading or installing new, American Standard provides advanced solutions to keep your home comfortable year-round. What's Included: American Standard 5A6H4018A Condenser: The American Standard 5A6H4 is a single-stage Silver 14 split-system heat pump built around a SpineFin outdoor coil and a durable scroll compressor, delivering up to 15.2 SEER2 cooling and 8.1 HSPF2 heating on low-GWP R-454B refrigerant, available in 1.5-5 ton (018-060) capacities. American Standard 5TEM4B02AC2 Air Handler: The American Standard 5TEM is a multi-position, convertible electric fan-coil air handler for use with split heat pump or AC condensers, housing an ECM or PSC blower and multi-circuit electric heat kit provisions; the 5TEM4 sub-series covers 1.5-5 ton fixed-speed models while 5TEM6 adds variable-speed operation. BAYHTR Supplementary Electric Heat Kit BAYHTR1505BR Heat Kit: BAYHTR accessory heat kits are factory-engineered supplementary electric heaters that field-install into American Standard 5TEM/TEM-series air handlers, available in multiple kW stages (approximately 5-23 kW across this model range) at 208/240V to provide backup or auxiliary electric resistance heat alongside a heat pump. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Heating Efficiency (HSPF2) 7.5 HSPF2 Condenser Model 5A6H4018A Condenser Stages Single Air Handler Model 5TEM4B02AC2 Heat Kit Model BAYHTR1505BR Heat Source Heat Pump w/ Electric Backup AHRI 215610840 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less