What's Included: The Lennox CK40HT evaporator coil from Kyle Heat and Air is a high-efficiency, cased coil designed to improve the performance and reliability of your residential HVAC system. With an all-aluminum design, this horizontal coil offers excellent heat transfer, durability, and quiet operation ideal for Lennox air conditioners, heat pumps, and furnaces in the 4 to 5-ton range. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Horizontal Design Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction Resists corrosion and extends coil lifespan. High-Efficiency Heat Transfer Enhances well-being and system performance year-round. Quiet Operation Minimizes noise for a quieter indoor environment. Compact & Durable Fits tight spaces and built for long-term reliability. OEM-Compatible Designed to pair with Lennox furnaces and outdoor units. Why Choose the Lennox CK40HT offered by Kyle Heat and Air? If replacing an older coil or upgrading your Lennox system, the CK40HT delivers a balance of performance, efficiency, and durability. Backed by a 10-year warranty, it provides peace of mind and reliable comfort year-round.   Coil Model CK40HT-51/61C Type Cased Evaporator Coil Cabinet Size C Capacity Range 4-5-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil SPEC SHEET    

Read more less

What's Included: The Lennox CK40HT evaporator coil from Kyle Heat and Air is a high-efficiency, cased coil designed to improve the performance and reliability of your residential HVAC setup. With an all-aluminum design, this horizontal coil offers excellent heat transfer, durability, and quiet function ideal for Lennox air conditioners, heat pumps, and furnaces in the 3.5-ton range. Includes licensed and insured HVAC deployment by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our setup causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Horizontal Design Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction Resists corrosion and extends coil life in harsh environments. High-Efficiency Heat Transfer Enhances comfort and system performance year-round. Quiet Operation Minimizes noise for a peaceful indoor environment. Compact & Durable Fits tight spaces and is built for long-term reliability. OEM-Compatible Specifically designed for Lennox furnaces and outdoor units. Why Choose the Lennox CK40HT offered by Kyle Heat and Air? Whether replacing an old coil or upgrading your Lennox system, the CK40HT delivers balanced performance, efficiency, and durability. Backed by a 10-year warranty, it provides reliable comfort every season.   Coil Model CK40HT-42B Type Cased Evaporator Coil Cabinet Size B Capacity Range 3.5-Ton Refrigerant R-454B Warranty 10 Year Units, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil SPEC SHEET  

Read more less

What's Included: The Lennox ML196UH furnace from Kyle Heat and Air offers high-efficiency heating with a 96% AFUE rating, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace delivers consistent warmth while reducing heating costs. With efficient operation and solid construction, the ML196UH provides reliable home heating backed by Lennox s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Maximizes fuel use, reducing energy waste and lowering utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent comfort. SureLight® Ignition System: Ensures dependable startup and long-lasting durability. Fully Insulated Steel Cabinet: Enhances efficiency and reduces noise for quiet operation. Flexible Installation Options: Compatible with direct and non-direct venting for versatile setup. The Lennox ML196UH furnace from Kyle Heat and Air is an energy-efficient, cost-effective, and reliable heating solution. Pair it with a Lennox cooling unit for year-round home satisfaction and efficiency.   Furnace Model ML196UH045XE36B Capacity (BTU) 44K Stages Single-Stage Cabinet Size B AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, supplementary costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.

Read more less

What's Included: The Lennox CK40CT evaporator coil offered by Kyle Heat and Air is a high-efficiency, cased coil crafted to improve the performance and reliability of your residential HVAC system. With an all-aluminum design, this upflow coil provides excellent heat transfer, durability, and quiet operation ideal for Lennox air conditioners, heat pumps, and furnaces in the 1.5-2-ton range. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Pieces replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Upflow Design Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction Resists corrosion and extends coil life in harsh environments. High-Efficiency Heat Transfer Enhances comfort and system performance year-round. Quiet Operation Minimizes noise for a quieter indoor environment. Compact & Durable Fits tight spaces and built for long-term reliability. OEM-Compatible Specifically designed for Lennox furnaces and outdoor units. Why Choose the Lennox CK40CT offered by Kyle Heat and Air? If replacing an old coil or upgrading your Lennox system, the CK40CT offers a balance of performance, efficiency, and durability. Backed by a 10-year warranty, it provides peace of mind and trustworthy comfort every season.   Coil Model CK40CT-24B Type Cased Evaporator Coil Cabinet Size B Capacity Range 1.5-2-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil SPEC SHEET  

Read more less

What's Included: The Lennox CK40HT evaporator coil from Kyle Heat and Air is a high-efficiency, cased coil designed to improve the performance and reliability of your residential HVAC system. With an all-aluminum design, this horizontal coil offers excellent heat transfer, durability, and quiet operation ideal for Lennox air conditioners, heat pumps, and furnaces in the 3.5 to 5-ton range. Includes licensed and insured HVAC deployment by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Horizontal Design Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction Resists corrosion and extends coil life in tough conditions. High-Efficiency Heat Transfer Enhances comfort and system performance year-round. Quiet Operation Minimizes noise for a quieter indoor environment. Compact & Durable Fits tight spaces and built for long-term reliability. OEM-Compatible Specifically crafted for Lennox furnaces and outdoor units. Why Choose the Lennox CK40HT offered by Kyle Heat and Air? If replacing an old coil or upgrading your Lennox system, the CK40HT provides a balance of performance, efficiency, and durability. Backed by a 10-year warranty, it delivers reliable comfort every season.   Coil Model CK40HT-42C Type Cased Evaporator Coil Cabinet Size C Capacity Range 3.5-5-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil SPEC SHEET  

Read more less

What's Included: The Lennox CK40CT evaporator coil offered by Kyle Heat and Air is a high-efficiency, cased coil designed to improve the performance and reliability of your residential HVAC system. With an all-aluminum design, this upflow coil provides efficient heat transfer, durability, and quiet operation ideal for Lennox air conditioners, heat pumps, and furnaces in the 3.5 to 5-ton range. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Coil Only Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line filter drier, ArmaFlex insulation PVC fittings pipe stick, couplings, elbows, tee, adapters Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the regular disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Cased Upflow Design Ensures easy installation and compatibility with Lennox HVAC systems. All-Aluminum Construction Resists corrosion and extends coil life in harsh environments. High-Efficiency Heat Transfer Enhances comfort and system functionality year-round. Quiet Operation Minimizes noise for a peaceful indoor environment. Compact & Durable Fits tight spaces and is built for long-term reliability. OEM-Compatible Designed to pair with Lennox furnaces and outdoor units. Why Choose the Lennox CK40CT offered by Kyle Heat and Air? If replacing an older coil or upgrading your Lennox unit, the CK40CT offers a balance of performance, efficiency, and durability. Backed by a 10-year warranty, it provides peace of mind and reliable ease year-round.   Coil Model CK40CT-48C Type Cased Evaporator Coil Cabinet Size C Capacity Range 3.5-5-Ton Refrigerant R-454B Warranty 10 Year Parts, 10 Year Cased and Uncased Coil (When Registered with OEM) RESOURCES Evaporator Coil SPEC SHEET    

Read more less

What's Included: The Lennox ML196UH furnace from Kyle Heat and Air offers high-efficiency heat with a 96% AFUE rating, ideal for homeowners seeking comfort and energy savings. This durable single-stage gas furnace provides consistent warmth while reducing heating costs. With efficient execution and solid construction, the ML196UH delivers trustworthy home heating backed by Lennox s trusted reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Fitting of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 96% AFUE Efficiency: Maximizes fuel use, reducing energy waste and lowering utility bills. Single-Stage Operation: Provides steady, reliable heating for consistent comfort. SureLight® Ignition System: Ensures dependable startup and long-lasting durability. Fully Insulated Steel Cabinet: Enhances efficiency and minimizes noise for quiet operation. Flexible Installation Options: Compatible with direct and non-direct venting for versatile setup. The Lennox ML196UH furnace from Kyle Heat and Air is an energy-efficient, cost-effective, and reliable heating solution. Pair it with a Lennox cooling unit for year-round home comfort and efficiency.   Furnace Model ML196UH070XE36B Capacity (BTU) 66K Stages Single-Stage Cabinet Size B AFUE 96% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.

Read more less

What's Included: The Lennox ML180UH furnace offered by Kyle Heat and Air delivers reliable heating and energy efficiency at an affordable price, ideal for residential use. With an 80% AFUE rating and long-lasting design, the ML180UH provides consistent comfort while controlling heating costs. Built for durability and simplicity, this furnace is a solid choice for homeowners seeking dependable performance backed by Lennox s reputation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective comfort. Single-Stage Running: Ensures reliable, consistent heating output for simple performance. Durable Steel Cabinet: Offers long-lasting performance with a wear-resistant design that reduces maintenance. Flexible Installation Options: Compact and versatile to fit various spaces and layouts. Quiet Operation: Designed to minimize noise for a more comfortable home environment. The Lennox ML180UH furnace offered by Kyle Heat and Air is a practical, dependable, and energy-efficient heat solution. Pair it with a Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH090E48B Capacity (BTU) 88K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or required modifications due to non-compliance with Low NOx rules. By purchasing from us, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML180UH furnace offered by Kyle Heat and Air delivers stable heating and energy efficiency at an affordable price, ideal for residential use. With an 80% AFUE rating and durable design, it provides consistent comfort while controlling heating costs. Built for durability and simplicity, this furnace is a solid choice for homeowners seeking dependable performance from Lennox. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating with energy-conscious operation for cost-effective comfort. Single-Stage Operation: Ensures reliable, consistent heating output. Durable Steel Cabinet: Offers long-lasting performance with wear resistance and low maintenance. Flexible Installation Options: Compact design fits various spaces and layouts. Quiet Operation: Minimizes noise for a comfortable home environment. The Lennox ML180UH furnace offered by Kyle Heat and Air is a practical, dependable, and energy-optimized heating solution. Pair it with a Lennox cooling system for a complete HVAC setup designed for year-round comfort and performance.   Furnace Model ML180UH090E60C Capacity (BTU) 88K Stages Single-Stage Cabinet Size C AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML180UHV furnace offered by Kyle Heat and Air delivers trustworthy heating with advanced features for energy efficiency and comfort. With an 80% AFUE rating and a variable-speed blower motor, it provides consistent warmth and improved airflow, ideal for homeowners seeking dependable performance and better comfort control. Built with Lennox s quality standards, this furnace ensures lasting reliability and cost-effective operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your house, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating while managing energy use for affordable comfort. Variable-Speed Blower: Improves airflow and temperature control, enhancing comfort and reducing energy use. Durable Steel Cabinet: Built to resist wear, ensuring long-lasting performance and less maintenance. Quiet Operation: Runs smoothly and quietly for a peaceful indoor environment. Enhanced Air Quality: Supports better filtration and humidity control when used with Lennox air purification systems. The Lennox ML180UHV furnace offered by Kyle Heat and Air is a dependable, efficient heating solution. Pair it with a Lennox air conditioner or heat pump for a complete HVAC system designed for year-round comfort and performance.   Furnace Model ML180UH090V48B Capacity (BTU) 88K Stages Single-Stage Variable Speed Cabinet Size B AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for fines, penalties, extra costs, or modifications due to non-compliance. By purchasing, you confirm you have verified compliance. If unsure, consult your local regulatory authority before buying.  

Read more less

What's Included: The Lennox ML180UHV furnace offered by Kyle Heat and Air delivers reliable heating with advanced features for energy efficiency and comfort. With an 80% AFUE rating and variable-speed blower motor, it provides consistent warmth and improved airflow, ideal for homeowners seeking dependable performance and better comfort control. Built with Lennox s quality standards, this furnace ensures lasting reliability and cost-effective operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides steady heating while managing energy use for affordable comfort. Variable-Speed Blower: Improves airflow and temperature control, optimizing comfort and reducing energy use. Long-lasting Steel Cabinet: Built to resist wear, ensuring long-lasting performance and less maintenance. Quiet Operation: Runs smoothly and quietly for a peaceful indoor environment. Enhanced Air Quality: Supports better filtration and humidity control when paired with Lennox air purification systems. The Lennox ML180UHV furnace offered by Kyle Heat and Air is a reliable, efficient heating solution. Pair it with a Lennox air conditioner or heat pump for a complete HVAC system designed for year-round well-being and performance.   Furnace Model ML180UH045V36A Capacity (BTU) 44K Stages Single-Stage Variable Speed Cabinet Size A AFUE 80% Configuration Upflow/Horizontal Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace COMPARISON CHART LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not responsible for fines, penalties, costs, or modifications due to non-compliance. By purchasing, you confirm compliance with applicable regulations. If unsure, consult your local regulatory authority before buying.  

Read more less

Lennox ML14KC1 Air Conditioner High-Efficiency Cooling Built for Long-Lasting Performance What's Included: The Lennox ML14KC1 air conditioner from Kyle Heat and Air delivers 30,000 BTUs (2.5 Ton) of dependable, energy-efficient cooling, ideal for residential comfort. Part of Lennox s Merit Series, this unit offers high-grade performance and affordability for dependable operation. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy-Efficient Cooling:Provides reliable performance with a SEER rating up to 14.3, reducing energy costs. Proven Scroll Compressor:Durable single-stage scroll compressor ensures reliable, quiet operation. Corrosion-Resistant Coil:High-efficiency coil resists outdoor conditions and optimizes cooling. Durable Construction:Galvanized steel cabinet with baked-on powder coat protects against rust and weather. Quiet Operation:Innovative fan and compressor components minimize noise during use. Why Choose the Lennox ML14KC1 offered by Kyle Heat and Air? The Lennox ML14KC1 air conditioner is ideal for homeowners seeking an affordable, efficient cooling solution. Its sturdy design and energy-efficient features ensure reliable performance in various weather conditions. Paired with a compatible Lennox air handler or thermostat, it creates an optimized cooling system for improved satisfaction and savings. Trust the Lennox ML14KC1 for reliable cooling and comfort season after season, backed by a respected HVAC brand.   Condenser Model ML14KC1-030 Size/Tonnage 2.5-Ton Cooling Efficiency (SEER2) 14.3 Stages Single Refrigerant R-454B Application Gas or Straight Cool Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES LIMITED WARRANTY PRODUCT BROCHURE

Read more less